25-toploader design target
The upper area provides an approximately 77.724 x 103.124 mm clear footprint. Physical capacity has not been verified.
Product format:
STL file
Santos Art Factory
Ripper Station V2 STL – Toploader & Penny Sleeve Organizer
Regular price$4.99Regular price
Two fit zones. One organized workflow. The stepped, open-front V2 design keeps toploader and penny-sleeve protection together at the rip table.
Repaired V2 digital STL
- Stepped open-front geometry creates wider upper and narrower lower fit zones
- Design targets: 25 toploaders above and 200 penny sleeves below
- Watertight single-body mesh with a completed reference slicer review
Description
Keep protection ready the moment you reveal a hit. Ripper Station V2 is a digital STL for a compact, two-level organizer that keeps toploaders and penny sleeves together at your rip station.
- Stepped storage geometry with an approximate 77.724 x 103.124 mm upper clear footprint and 67.386 x 93.980 mm lower clear footprint
- Design targets: 25 toploaders and 200 penny sleeves; actual capacity varies and has not been physically fit-tested
- Canonical overall size: 93.724 x 119.124 x 110.680 mm when interpreted in millimeters
- Validated as one watertight, consistently wound mesh with no boundary or non-manifold edges
Reference slicer review: one OrcaSlicer toolpath completed successfully with automatic supports enabled. It generated no support feature regions and four internal bridge regions. This is a starting-point check, not a universal support or print-quality guarantee.
Digital STL file only. No physical organizer, filament, card supplies, or printer-specific G-code is included.
Before printing: STL does not encode units. Confirm the listed dimensions, inspect every layer, measure your own supply stacks, and choose orientation, supports, material, and settings for your printer. V2 has not been physically test-printed or supply-fit tested.
What you receive
One repaired V2 digital STL with a normalized overall size of 93.724 x 119.124 x 110.680 mm. The file units are inferred as millimeters from the geometry, so confirm those dimensions in your slicer before printing. No physical organizer, filament, card supplies, or G-code is included.
Before you print
A reference 0.20 mm OrcaSlicer toolpath completed at the listed dimensions with automatic supports enabled and no support features generated. It produced 553 layers and four internal bridge regions. Confirm the scale, preview every layer, and choose settings for your own printer and material. V2 has not been physically test-printed.
Fit notes
The upper storage area has an approximately 77.724 x 103.124 mm clear footprint, and the lower area has an approximately 67.386 x 93.980 mm clear footprint. Capacity targets are 25 toploaders and 200 penny sleeves, but neither target has been physically fit-tested. Measure your complete stacks and compare them with the listed clear footprints before printing.
Built for the moment
Organize two protection formats in one footprint
The stepped open-front geometry provides a wider upper fit zone and a narrower lower fit zone. The 25-and-200 counts remain design targets pending a physical fit test.
200-sleeve design target
The lower area provides an approximately 67.386 x 93.980 mm clear footprint. Physical capacity has not been verified.
Reference slice reviewed
A 0.20 mm OrcaSlicer check completed with automatic supports enabled and no support features generated. Verify on your own machine.
Measured V2 footprint
Normalized overall size is 93.724 x 119.124 x 110.680 mm, with units inferred as millimeters from the geometry.
Stepped open-front geometry
See both fit zones at a glance
A wider upper span and narrower lower span shape two measured fit zones in one watertight body.
Product imagery is a digital model render, not a photograph of a printed part. V2 has not been physically printed or fit-tested.
Know the fit
Check the V2 geometry before you print
Capacity targets are 25 toploaders and 200 penny sleeves, not physically verified capacities. Measure your supplies, compare them with the clear footprints, and confirm the normalized size in your slicer.
| Specification | Ripper Station |
|---|---|
| Normalized overall size | 93.724 x 119.124 x 110.680 mm |
| Upper clear footprint | Approximately 77.724 x 103.124 mm |
| Lower clear footprint | Approximately 67.386 x 93.980 mm |
| Unit interpretation | Millimeters inferred from geometry; verify dimensions in your slicer |
| Print setup status | Reference 0.20 mm slice completed with automatic supports and no support features generated |
| Mesh validation | Repaired watertight single body; toolpath reviewed; no physical print or fit test completed |
Before you buy
Straight answers before you slice
Review the measured geometry, design-target capacities, inferred units, and untested print status before purchasing.
Is this a physical organizer?
No. This listing includes one repaired V2 digital STL file. No physical organizer, filament, toploaders, penny sleeves, or other card-protection supplies are shipped.
Will it fit my supplies?
Fit has not been physically verified. The upper clear footprint is approximately 77.724 x 103.124 mm, and the lower clear footprint is approximately 67.386 x 93.980 mm. Measure your actual stacks and compare them with those dimensions; 25 toploaders and 200 penny sleeves are design targets only.
Does the model require supports?
In one 0.20 mm OrcaSlicer reference check, automatic supports were enabled and no support features were generated. The toolpath included four internal bridge regions. This is not a universal guarantee, so inspect the complete preview for your own printer and material.
What should I check before printing?
Confirm that your slicer shows an overall size of 93.724 x 119.124 x 110.680 mm, then review every layer and choose printer-specific settings from the toolpath. The reference 0.20 mm slice produced 553 layers; V2 has not been physically test-printed.
Keep exploring